PDK81301-2*1.0+2*2*0.2 Underwater Power Cable
video

PDK81301-2*1.0+2*2*0.2 Underwater Power Cable

Model number: PDK81301-2*1.0+2*2*0.2
Specification: 2*1.0+2.2.0.2
Conductor material: Tin-coated wire
Insulation material: PE、XLPE
Sheath material: Polyether urethane (PUR)
Send Inquiry
Product Introduction

This product is a hybrid power-and-signal watertight (submersible) cable, specifically engineered for underwater systems that require both moderate power delivery and multiple independent signal circuits (such as subsea cameras, sonar heads, underwater sensors, and small ROV control umbilical). It integrates two 1.0 mm² power cores with two twisted-pair signal cores (2×2×0.2 mm²) within a single compact jacket. The cable deliberately adopts dual insulation materials – XLPE for the power cores and PE for the signal cores – to optimize electrical performance for each function while maintaining outstanding watertight integrity.

 

Model number

PDK81301-2*1.0+2*2*0.2

Specification

2*1.0+2.2.0.2

Conductor material

Tin-coated wire

Insulation material

PE,XLPE

Sheath material

Polyether urethane (PUR)

Sheath outer diameter (mm)

9.1±0.3mm

Sheath color

wathet blue

Temperature range

-40-105℃

Water pressure resistance

10MPA

 

The PUR (polyrther urethane) outer jacket provides exceptional abrasion resistance, low-temperature flexibility, and long-term resistance to seawater, oils, and marine growth. This jacket, combined with a fully water-sealed core assembly, ensures zero leakage under continuous high hydrostatic pressure (up to 1000m depth) without relying on tensile strength design.

This intentional material differentiation ensures that the power cores can safely carry higher current without overheating, while the signal cores maintain clean, low‑loss transmission even in the presence of nearby power conductors.

 

Ideal for:

Subsea cameras and LED lighting systems (power + video control signals)

Sonar transducers and acoustic positioning beacons (low‑noise signal + power)

Underwater sensors (pressure, temperature, turbidity, conductivity) requiring separate power and analog outputs

Small ROVs and AUVs where weight and diameter are critical

Scientific marine instruments and data loggers

Any underwater equipment needing two independent power conductors plus two twisted signal pairs with optimized insulation materials for each function, without mechanical tension requirements

This cable leverages the best of both insulation worlds: XLPE for robust, heat‑resistant power delivery and PE for low‑loss, high‑integrity signal transmission – all within a single watertight PUR jacket. It is an ideal solution for marine engineering, subsea instrumentation, underwater surveillance, and oceanographic research.

Hot Tags: hybrid watertight cable, XLPE PE insulation submersible cable, underwater camera tether, sonar cable, PUR watertight cable, custom waterproof hybrid cable, suppliers, manufacturers, customized, cheap, low price, in stock

 

product-800-800

 

Hot Tags: pdk81301-2*1.0+2*2*0.2 underwater power cable, suppliers, manufacturers, customized, cheap, low price, in stock, 2 5 mm 3 core cable, 5 conductor shielded cable, multicore underwater cable, underwater coaxial hybrid cable, Underwater Green Multicore Submersible Cable, Underwater TPU Umbilical Cable

Send Inquiry

whatsapp

Phone

E-mail

Inquiry